Skip to main content Scroll Top

PRINTING CAPABILITIES

FLEXOGRAPHIC PRINTING

PembaFlex offers up to 6-colour central impression (CI) flexographic printing on polyethylene film and bags, adding your branding, product information and graphics to your packaging.

WHAT IS CI FLEXO?

PRECISE PRINTING ON FLEXIBLE FILM

Flexographic printing transfers ink from flexible relief plates onto the film. On a central impression press, every colour station is arranged around one large drum, and the film is held against that drum throughout printing. This keeps stretchy polyethylene film stable, so colours line up accurately from the first metre to the last.

Diagram of a central impression flexographic press: film unwinds, wraps around one central drum past six colour print stations, is dried and rewound as a printed roll

WHY CI FLEXO

THE BENEFITS OF FLEXOGRAPHIC PRINTING

UP TO 6 COLOURS

Multi-colour printing for logos, product graphics, instructions and regulatory information.

ACCURATE REGISTRATION

The central drum supports the film throughout printing, keeping colours aligned even on thin, flexible film.

EFFICIENT PRODUCTION

Flexo runs at high speeds with short drying times, making it well suited to medium and long production runs.

PRINTED IN-HOUSE

Printing is combined with our extrusion and converting capabilities, keeping film, print and finishing under one roof.

BRAND VISIBILITY

Printed packaging promotes your brand on shelf, in the warehouse and through the supply chain.

WIDE RANGE OF FORMATS

Print on films, sheeting, shrink sleeves, industrial bags, courier bags and custom packaging.

flexographic printing

WHAT WE PRINT

  • Custom printed polyethylene packaging
  • Courier bags (CourierFlex™)
  • Industrial and custom bags
  • Shrink sleeves and collation film
  • Lamination films
  • Fertiliser and vegetable bags

HOW IT WORKS

FROM ARTWORK TO PRINTED PACKAGING

01

ARTWORK & PREPRESS

Your artwork is checked and prepared for flexo: colours are separated, small details adjusted and trapping added so colours meet cleanly.

02

PLATE MAKING

A flexible photopolymer plate is made for each colour, with the image raised on the plate surface.

03

SURFACE TREATMENT

Polyethylene film is corona treated to raise its surface energy so the ink bonds properly and does not rub off.

04

PRINTING

An engraved anilox roller meters a thin, even layer of ink onto each plate, which prints onto the film as it travels around the central impression drum.

05

CONVERTING

Printed film is dried, wound and then slit, sealed or converted into bags, sleeves or rolls for your packaging line.

SPOT COLOURS

Each colour is mixed to match a specific Pantone® (PMS) reference and printed from its own plate. Spot colours give the most consistent, vibrant results for logos, text and bold graphics, and are the best choice for matching brand colours from run to run.

COLOUR & PRINT

SPOT COLOUR OR PROCESS PRINT?

Flexo can print solid brand colours, full-colour images, or a combination of both.

Comparison of a solid spot colour ink matched to Pantone and a CMYK process halftone made of cyan, magenta, yellow and black dots

PROCESS (CMYK) PRINTING

Cyan, magenta, yellow and black are printed as fine dots that combine to create a wide range of colours, suited to photographs and full-colour designs. Process and spot colours can be combined, for example a photo printed in CMYK with a logo in its exact Pantone colour.

PREPARING YOUR ARTWORK

ARTWORK GUIDELINES

Good artwork is the starting point for good print. Following these guidelines helps avoid delays and extra prepress work.

  • Supply vector files (AI, EPS or print-ready PDF) with fonts converted to outlines
  • Specify colours by Pantone® number; use CMYK, not RGB, for full-colour work
  • Avoid very small or thin text, especially reversed out of a solid colour
  • Allow overlap (trapping) between touching colours to prevent gaps
  • Print barcodes in a dark colour on a light background, with clear space around them
  • Tell us whether the design prints on clear, white or coloured film, as this affects how colours appear

GOOD TO KNOW

FREQUENTLY ASKED QUESTIONS

Can you match my brand colours?

Yes. Supply your Pantone® references, or a printed sample, and the inks are matched as closely as the film allows.

Are plates a once-off cost?

Plates are made for each colour of a design and can be reused for repeat orders of the same artwork. Changing the design requires new plates.

Do I need my own designer?

Not necessarily. Send us what you have, such as a logo and the information that needs to appear, and our team will advise on the best way to prepare it for print.

What information do you need for a quote?

Product type, size, film thickness or application, number of colours, quantity and your artwork. You can upload artwork directly on our enquiry form.

LET’S WORK TOGETHER

STARTING A PRINTED JOB?

Send us your artwork, product sizes and quantities, and our team will advise on the film, colours and format best suited to your application. Upload your artwork with your enquiry on our contact page.